Compex-systems Advanced SerialRAID Adapters SA33-3285-02 Uživatelský manuál Strana 113

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 531
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 112
8. Select the adapter that contains the rejected disk drive.
The following menu is displayed:
Identify Rejected Array Disks
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
SSA RAID Manager ssa0
* Rejected Array Disks +
Flash Disk Identification Lights yes +
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
9. Select yes in the Flash Disk Identification Lights field.
10. Press the List key to list the disk drives.
11. From the displayed list, select the disk drives that you want to identify.
The Check light flashes on each disk drive that you have selected.
12. If the disk drive was rejected from the array because the disk drive itself has failed,
go to step 13 on page 94.
If the disk drive was rejected from the array because some other part has failed
(for example, a power supply unit, or an SSA cable):
a. Correct the problem, or call your service representative.
b. Add the disk drive to the array (see Adding a Disk Drive to an SSA RAID
Arrayon page 140).
c. Run system diagnostics to verify that the repair is successful.
Alternatively:
a. Change the use of the original disk drive so that it becomes a hot spare disk
drive (see Changing or Showing the Use of an SSA Disk Driveon page 144).
b. Install a replacement disk drive (see Installing a Replacement Disk Driveon
page 95).
c. Run system diagnostics to verify that the repair is successful.
Chapter 6. Using the RAID Array Configurator 93
Zobrazit stránku 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 530 531

Komentáře k této Příručce

Žádné komentáře